1. kenwood stereo control amplifier model basic c2

#1. kenwood stereo control amplifier model basic c2 iso

Pin 6 is optional used for vehicle instrument illumination.

Pin 3 is optional used for reversing lamp signal on Becker radios with navigation.

Pin 1 is optional used for speed dependent volume control and possibly navigation.

On some cars the +12V Ignition and Battery positions are reversed, such as later Volkswagen Group cars, Peugeot 106, Vauxhall Astra, CitroГ«n C3 and some JCB tractors.The first connector A is always present, is usually black in colour, and contains pins for power-supply, off/on (typically controlled by ignition key), optional control for a motorised antenna and so on. Part 1 of the standard is dedicated to 'Dimensions and general requirements' and Part 2 to 'Performance requirements'.

#1. kenwood stereo control amplifier model basic c2 iso

ISO 10487 connector pinout (plug side of male, wiring side of female) Parts Steering Wheel Controls, SWC or Key, brown with black stripe, usually employs CAN bus.Back view, orange with white strip, works when reverse gear light is on and it is used to turn on back camera screen (i.e.PhoneВ : the cable to mute when receiving a call, is brown.Amplifier remote turn on: blue with white stripe.They have low amperage and it is activated when radio is turned on. Wires with black stripe are for negative power: as GND ( black), 0V, usually connected to the vehicle's metal chassis and body. Illumination ( orange with white stripe) or dimmer, when it is night and cars lights are turned on, head unit screen illumination is dimmed.This allows the radio to retain settings (for example stored radio stations) when the ignition is switched off. Constant ( yellow), also called BAT or Battery, provides permanent +12V power from battery.ACC ( red), supplies +12V power to car audio and other accessories, only when the car's ignition is switched on.Splicing wires used in car audio are mainly for power, ground, amplifier and antenna, speakers, phone and others.